Euro pallet load planner

Pick a pallet and a container or trailer, or type your own inside dimensions. The planner runs the same engine as our load tables and draws the result, with and without handling clearance.

Document
TOOL-002
Sheet
Tools
Last reviewed
Sources
6 cited

Inputs

Result

25Floor positions
23With clearance
84.8%Floor used
391Empties under the door
12,031 mm2,352 mmFront wallDoors
25 EPAL 1 pallets on the full deck. Darker pallets are turned 90°.
11,931 mm2,302 mmFront wallDoors
23 with 100 mm and 50 mm clearance. Darker pallets are turned 90°.

Empty pallets: 17 per stack under 2,585 mm, 391 in all, about 9,775 kg, within the payload.

Limits

The planner places pallets in rows, some turned 90°, and keeps the layout with the most pallets. It does not mix pallet sizes, allow overhang, reserve air channels for reefers or check axle loads. Published inside dimensions vary by builder, so measure the unit for a tight load. The methodology page sets out every step.

Sources

Last reviewed . Figures come from these publications; follow the links for the current versions.

  1. Container specification (guideline), US edition, Leman USA Inc.
  2. 20 foot reefer specifications, SeaCube Containers
  3. 40 foot high cube reefer specifications, SeaCube Containers
  4. Intermodal 53-foot container equipment sheet, CN (Canadian National Railway)
  5. Euroliner trailers (equipment page, formerly P&O Ferrymasters), DP World
  6. Load-count method (computed by this site), epalrecycling.com

What do you need to do with them?

Pick one. Each form takes about a minute and goes to one partner, not a list of dealers.